Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. It may cause permanent damage! This motherboard supports Untied Overclocking Technology. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

Uploader: Neramar
Date Added: 12 December 2008
File Size: 30.23 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 30436
Price: Free* [*Free Regsitration Required]

ASRock i65G Motherboard 19 3. Info from the manual: Do NOT place jumper caps over these headers and connectors. Make sure to unplug the power cord before installing or removing the motherboard.

Audio, video, sata and network issues are the commonly encountered problems as a result of lack of Asrock i65g motherboard drivers. Make sure the red-striped side of the cable is plugged into Pin1 side of the connector.

ASRock > DualPro

Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. These problems can conveniently be solved by downloading the updated Asrock auido motherboard drivers. Ask a Question Usually answered in minutes!

ASRock i65G Motherboard 59 1. Use your left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center of PnP cap to assist in removal. ASRock i65G Motherboard 25 1. More vual information of the motherboard can be found in the user manual presented in the Support CD.


Place the heatsink onto the socket. Please connect an ATX power supply to this connector. Collegare il cavo della ventolina telaio a questo connettore e far combaciare il filo nero al pin terra. This header supports an optional wireless transmitting and receiving infrared module.

It may asrrock permanent damage!


Related Topics fsb mb 10 bios cpu mv43v bios cpu mt cp how to format cpu format cp manual fsb asrocj 10 mh fs 10 manual. The Support CD that came with the motherboard contains necessary drivers and useful utilities that will enhance motherboard features. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.

Otherwise, it will operate at single channel mode.


77565g fasteners with the motherboard throughholes. Dul you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology. English Please refer to the warning on page 7 for the possible overclocking risk before you apply Untied Overclocking Technology.

Carefully place the CPU into the socket by using a purely vertical motion. Failure to do so may cause physical injuries to you and damages to motherboard components. NAO ligue as placas maes i65G!


Rotate the load plate to fully open position at approximately degrees. I hope this procedure will help you. Remove the system unit cover if your motherboard is already installed in a chassis.

Website de ASRock http: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.

Before you resume the system, please check if the CPU fan on the duak functions properly and unplug the power cord, then plug it back again. Driver asrock ns audio driver asrock motherboard drivers windows xp asrock Xp asrock conroegv driver asrock audio driver asrock i65g audio driver 7 asrock p4vm drivers n68c-s ucc lan driver realtek rtl driver xp.

Consulte las instrucciones del distribuidor del dispositivo IDE para conocer los detalles.